CBSE Class 12 Chemistry Electrochemistry MCQs

Refer to CBSE Class 12 Chemistry Electrochemistry MCQs provided below. CBSE Class 12 Chemistry MCQs with answers available in Pdf for free download. The MCQ Questions for Class 12 Chemistry with answers have been prepared as per the latest syllabus, CBSE books and examination pattern suggested in Class 12 by CBSE, NCERT and KVS. Multiple Choice Questions for Chapter 3 Electrochemistry are an important part of exams for Class 12 Chemistry and if practiced properly can help you to get higher marks. Refer to more Chapter-wise MCQs for CBSE Class 12 Chemistry and also download more latest study material for all subjects

MCQ for Class 12 Chemistry Chapter 3 Electrochemistry

Class 12 Chemistry students should refer to the following multiple-choice questions with answers for Chapter 3 Electrochemistry in Class 12. These MCQ questions with answers for Class 12 Chemistry will come in exams and help you to score good marks

Chapter 3 Electrochemistry MCQ Questions Class 12 Chemistry with Answers

Question : Effect of dilution on conductivity of solution:

a) Increases  
b) Decreases
c) Unchanged
d) None of the above

Answer : A


Question : Through a solution of CuSO4 a current of 3 amperes was passed for 2 hours. At cathode 3 g of Cu2+ions were discharged. The current efficiency is [At. wt. of Cu = 63.5]

a) 33.3%
b) 42.2%
c) 48.7%
d) 54.4%

Answer : B


Question : Which shows electrical conductance?

a) Sodium    
b) Diamond
c) Potassium
d) Graphite

Answer : D

 

Question : Which of the following reactions is used to make a fuel cell?

 

Answer : C 

 

Question : Time required to deposit one millimole of aluminium metal by the passage of 9.65 amperes through aqueous solution of aluminium ion is

a) 30 s       
b) 10 s
c) 30,000 s
d) 10,000 s

Answer : A 

 

Question : The products formed when an aqueous solution of NaBr is electrolysed in a cell having inert electrodes are:

a) Na and Br2
b) Na and O2
c) H2 ,Br2 and NaOH
d) H2 and O2

Answer : C

 

Question : Equivalent conductance of an electrolyte containing NaF at infinite dilution is 90.1 Ohm–1cm2. If NaF is replaced by KF what is the value of equivalent conductance?

a) 90.1 Ohm–1cm2
b) 111.2 Ohm–1cm2
c) 0                        
d) 222.4 Ohm–1cm2

Answer : A  


Question : For a cell reaction involving two electron change, the standard EMF of the cell is 0.295 V at 2°C. The equilibrium constant of the reaction at 25°C will be

a) 29.5 × 10–2
b) 10
c) 1 × 1010    
d) 2.95 × 10–10

Answer : C  


Question : A 0.5 M NaOH solution offers a resistance of 31.6 ohm in a conductivity cell at room temperature. What shall be the approximate molar conductance of this NaOH solution if cell constant of the cell is 0.367 cm–1.

a) 234 S cm2 mole–1 
b) 23.2 S cm2 mole–1
c) 4645 S cm2 mole–1
d) 5464 S cm2 mole–1

Answer : D 

 

Question : Which of the following statements is incorrect regarding electrochemistry?

a) It is the study of production of electricity from energy released during spontaneous chemical reactions.

b) NaOH, Cl2, alkali and alkaline earth metals are prepared by electrochemical methods.

c) The demerit associated with electrochemical methods is that they are more polluting. Thus they are ecodestructive.

d) Electrochemical reactions are more energy efficient and less polluting.

Answer : C

 

Question : What flows in the internal circuit of a galvanic cell?

a) Ions

b) Electrons

c) Electricity

 d) Atoms

Answer : A

 

Question : Which of the following statements about galvanic cell is incorrect

a) anode is positive

b) oxidation occurs at the electrode with lower reduction potential

c) cathode is positive

d) reduction occurs at cathode

Answer : A

 

Question : Reaction that takes place at graphite anode in dry cell is

a) Zn2+ + 2e+ →Zn(s)

b) Zn(s)→Zn2+ + 2e-

c) Mn2+ + 2e- →Mn(s)

d) Mn(s)→Mn- + e- +1.5V

Answer : B

 

Question : In which of the following conditions salt bridge is not required in a galvanic cell?

a) When galvanic cell is used in geyser.

b) When distance between oxidation half cell and reduction half cell is negligible.

c) Electrolytic solutions used in both the half cells are of same concentration.

d) When both the electrodes are dipped in the same electrolytic solution.

Answer : D

 

Question : Which device converts chemical energy of a spontaneous redox reaction into electrical energy?

a) Galvanic cell

b) Electrolytic cell

c) Daniell cell

d) Both a) and c)

Answer : D


Question : To deposit one equivalent weight of silver at cathode, the charge required will be

a) 9.65 × 104 C

b) 9.65 × 103 C

c) 9.65 × 105 C

d) 9.65 × 107 C

Answer : A


Question : The volume of oxygen gas liberated at NTP by passing a current of 9650 coulombs through acidified water is

a) 1.12 litre

b) 2.24 litre

c) 11.2 litre

d) 22.4 litre

Answer : B


Question : Three faradays electricity was passed through an aqueous solution of iron (II) bromide. The weight of iron metal (at. wt = 65) deposited at the cathode (in gm) is

a) 56

b) 84 

c) 112

d) 168

Answer : B


Question : Faraday’s laws of electrolysis will fail when

a) temperature is increased

b) inert electrodes are used

c) a mixture of electrolytes is used

d) None of these cases

Answer : D


Question : The electric charge for electrode decomposition of one gram equivalent of a substance is

a) one ampere per second

b) 96500 coulombs per second

c) one ampere for one hour

d) charge on one mole of electrons

Answer : D


Question : In electrolysis of dilute H2SO4 using platinum electrodes

a) H2 is evolved at cathode

b) NH2 is produced at anode

c) Cl2 is obtained at cathode

d) O2 is produced

Answer : A


Question : The difference between the electrode potentials of two electrodes when no current is drawn hrough the cell iscalled _________.

a) Cell potentials

b) Cell emf

c) Potential difference

d) Cell voltage

Answer : B

 

Question :  Which of the following pair(s) is/are incorrectly matched?

(i) R (resistance) – ohm (Ω)

(ii)  (resistivity) – ohm metre (Ωm)

(iii) G (conductance) – seimens or ohm (S)

(iv)  (conductivity) – seimens metre–1 (Sm–1)

a) (i), (ii) and (iii)

b) (ii) and (iii)

c) (i), (ii) and (iv)

d) (iii) only 

Answer : C

 

Question : The reference electrode is made by using

a) ZnCl2

b) CuSO4

c) HgCl2

d) Hg2Cl2

Answer : D

 

Question : The standard hydrogen electrode potential is zero, because

a) hydrogen oxidized easily

b) electrode potential is considered as zero

c) hydrogen atom has only one electron

d) hydrogen is a very light element

Answer : B

 

Question : Without losing its concentration ZnCl2 solution cannot be kept in contact with

a) Au

b) Al

c) Pb

d) Ag

Answer : B

 

Question : On the basis of the following E° values, the strongest oxidizing agent is :

[Fe(CN)6]4– +[Fe(CN)6]3– + e– ; E° = – 0.35 V

Fe2+ → Fe3+ + e–; E° = – 0.77 V

a) [Fe(CN)6]4–

b) Fe2+

c) Fe3+

d) [Fe(CN)6]3–

Answer :C

 

Question : Standard electrode potential of three metals X, Y and Z are – 1.2 V, + 0.5 V and – 3.0 V, espectively. The reducing powerbof these metals will be :

a) Y > Z > X

b) X > Y > Z

c) Z > X > Y

d) X > Y > Z

Answer : C

 

Question : Standard electrode potential for Sn4+ / Sn2+ couple is + 0.15 V and that for the Cr3+ / Cr couple is – 0.74 V. These two couples in their standard state are connected to make a cell. The cell potential will be

a) + 1.19 V

b) + 0.89 V

c) + 0.18 V

d) + 1.83 V

Answer : B

 

Question : Standard reduction potentials of the half reactions are given below :

F2(g) + 2e– → 2F– (aq); E° = + 2.85 V

Cl2(g) + 2e– → 2Cl–(aq); E° = + 1.36 V

Br2(l) + 2e– → 2Br–(aq); E° = + 1.06 V

I2(s) + 2e– → 2I–(aq); E° = + 0.53 V

The strongest oxidising and reducing agents respectively are

a) F2 and I–

b) Br2 and Cl–

c) Cl2 and Br–

d) Cl2 and I2

Answer : A

 

Question : A button cell used in watches functions as following

Zn(s) + Ag2O(s) + H2O(l)

2Ag(s) + Zn2+(aq) + 2OH–(aq)

If half cell potentials are :

Zn2+(aq) + 2e– → Zn(s); Eo = – 0.76 V

Ag2O(s) + H2O (l) + 2e– → 2Ag(s) + 2OH–(aq); Eo = 0.34 V

The cell potential will be :

a) 0.42 V

b) 0.84 V

c) 1.34 V

d) 1.10 V

Answer : D

 

Question : The oxidation potentials of A and B are +2.37 and +1.66 V respectively. In chemical reactions

a) A will be replaced by B

b) A will replace B

c) A will not replace B

d) A and B will not replace each other

Answer : B

 

Question : A smuggler could not carry gold by depositing iron on the gold surface since

a) gold is denser

b) iron rusts

c) gold has higher reduction potential than iron

d) gold has lower reduction potential than iron

Answer : B

 

Question : Which cell will measure standard electrode potential of copper electrode ?

a) Pt (s) |H2 (g, 0.1 bar) |H+ (aq., 1 M) ||Cu2+ (aq., 1 M) | Cu

b) Pt (s) |H2 (g, 1 bar) |H+ (aq., 1 M) ||Cu2+ (aq., 2 M) | Cu

c) Pt (s) |H2 (g, 1 bar) |H+ (aq., 1 M) ||Cu2+ (aq., 1 M) | Cu

d) Pt (s) |H2 (g, 1 bar) |H+ (aq., 0.1 M) ||Cu2+ (aq., 1 M) | Cu

Answer : C

 

Question : Which of the following statement is not correct about an inert electrode in a cell ?

a) It does not participate in the cell reaction.

b) It provides surface either for oxidation or for reduction reaction.

c) It provides surface for conduction of electrons

d) It provides surface for redox reaction.

Answer : D

 

Question : In the electrochemical reaction 2Fe3+  + Zn→Zn2+ + 2Fe2+ , on increasing the concentration of Fe2+

a) increases cell emf

b) increases the current flow

c) decreases the cell emf

d) alters the pH of the solution

Answer : C

 

Question : The standard e.m.f. of a galvanic cell involving cell reaction with n = 2 is found to be 0.295 V at 25°C. The equilibrium constant of the reaction would be (Given F = 96500 C mol–1; R = 8.314JK–1mol–1)

a) 2.0x1011

b) 4.0x1012

c) 1.0x102

d) 1.0x1010

Answer : D


Question :  On electrolysis of dilute sulphuric acid using platinum electrodes, the product obtained at the anode will be

a) hydrogen

b) oxygen

c) hydrogen sulphide

d) Sulphur dioxide

Answer : B

 

Question :  If 0.5 amp current is passed through acidified silver nitrate solution for 100 minutes. The mass of silver deposited oncathode, is (eq.wt.of silver nitrate = 108)

a) 2.3523 g

b) 3.3575 g

c) 5.3578 g

d) 6.3575 g

Answer : B


Question :  Molar ionic conductivities of a two-bivalent electrolytes x2+ and y2- are 57 and 73 respectively. The molar conductivity of the solution formed by them will be

a) 130 S cm2 mol–1

b) 65 S cm2 mol–1

c) 260 S cm2 mol–1

d) 187 S cm2 mol–1

Answer : A

 

Question : The standard emf of a cell, involving one electron change is found to be 0.591 V at 25°C. The equilibrium constant of the reaction is (F = 96500 C mol–1)

a) 1.0 × 101

b) 1.0 × 105

c) 1.0 × 1010

d) 1.0 ×1030

Answer : C

 

Question :  For the galvanic cell

Zn | Zn2+ (0.1M) || Cu2+ (1.0M)|Cu the cell potential increase if:

a) [Zn2+] is increased

b) [Cu2+] is increased

c) [Cu2+] is decreased

d) surface area of anode is increased

Answer : B

 

Question :  Which of the following is the use of electrolysis?

a) Electrorefining

b) Electroplating

c) Both a) & b)

d) None of these

Answer : D

 

Question :  An electrolytic cell contains a solution of Ag2SO4 and has platinum electrodes. A current is passed until 1.6 gm of O2 has been liberated at anode. The amount of silver deposited at cathode would be

a) 107.88 gm

b) 1.6 gm

c) 0.8 gm

d) 21.60 gm

Answer : D

 

Question :  When 9650 coulombs of electricity is passed through a solution of copper sulphate, the amount of copper deposited is (given at. wt. of Cu = 63.6)

a) 0318g

b) 3.18 g

c) 31.8g

d) 63.6g

Answer : B

 

Question :  Find the charge in coulombs required to convert 0.2 mole VO3 –2 into VO4 –3 –

a) 1.93 × 104

b) 9.65 × 104

c) 1.93 × 105

d) 9.65 × 105

Answer : A

 

Question : A silver cup is plated with silver by passing 965 coulombs of electricity. The amount of Ag deposited is :

a) 107.89 g

b) 9.89 g

c) 1.0002 g

d) 1.08 g

Answer : D

 

Question :  The number of coulombs required to reduce 12.3 g of nitrobenzene to aniline is :

a) 115800 C

b) 5790 C

c) 28950 C

d) 57900 C

Answer : D


Question :  The amount of electricity that can deposit 108 g of Ag from AgNO3 solution is:

a) 1 F

b) 2 A

c) 1 C

d) 1 A

Answer : A

 

Question : If 0.01 M solution of an electrolyte has a resistance of 40 ohms in a cell having a cell constant of 0.4 cm–1, then its molar conductance in ohm–1 cm2 mol–1 is

a) 102

b) 104

c) 10

d) 103

Answer : D

 

Question : Specific conductance of a 0.1 N KCl solution at 23ºC is 0.012 ohm–1 cm–1. Resistance of cell containing the solutionat same temperature was found to be 55 ohm. The cell constant is

a) 0.0616 cm–1

b) 0.66 cm–1

c) 6.60 cm–1

d) 660 cm–1

Answer : B

 

Question : The unit of equivalent conductivity is

a) ohm cm

b) ohm–1 cm2 (g equivalent)–1

c) ohm cm2 (g equivalent)

d) S cm–2

Answer : B

 

Question : The resistance of 0.01 N solution of an electrolyte was found to be 220 ohm at 298 K using a onductivity cell with a cell constant of 0.88cm–1. The value of equivalent conductance  of solution is –

a) 400 mho cm2 g eq–1

b) 295 mho cm2 g eq–1

c) 419 mho cm2 g eq–1

d) 425 mho cm2 g eq–1

Answer : A

 

Question : Specific conductance of 0.1 M HNO3 is 6.3×10–2 ohm–1 cm–1. The molar conductance of the solution is

a) 100 ohm–1 cm2

b) 515 ohm–1 cm2

c) 630 ohm–1 cm2

d) 6300 ohm–1 cm2 

Answer : C


Question : The specific conductance of a 0.1 N KCl solution at 23°C is 0.012 ohm–1cm–1. The resistance of cell containing the solution at the same temperature was found to be 55 ohm. The cell constant will be

a) 0.142 cm–1

b) 0.66 cm–1

c) 0.918 cm–1

d) 1.12 cm–1 

Answer : B


Question :  The unit of specific conductivity is

a) ohm cm–1

b) ohm cm–2

c) ohm–1 cm

d) ohm–1 cm–1 

Answer : D


Question : Which of the following solutions of KCl will have the highest value of specific conductance?

a) 1.0 N

b) 0.1 N

c) 1.0 ×10–2N

d) 1.0 ×10–3

Answer : A


Question : The cell constant of a conductivity cell ___________.

a) changes with change of electrolyte.

b) changes with change of concentration of electrolyte.

c) changes with temperature of electrolyte.

d) remains constant for a cell.

Answer : D

 

Question : The standard reduction potential at 298K for the following half cells are given:
Which is the strongest reducing agent?
a) Zn(s)
b) Cr(s)
c) Both
d) None of these
Answer : A


Question : Faraday’s laws of electrolysis are related to the
a) Atomic number of the cation
b) Atomic number of the anion
c) Equivalent weight of the electrolyte
d) Speed of the cation

Answer : C


Question : Which of the following statement is wrong about galvaniccell ?
a) cathode is positive charged
b) anode is negatively charged
c) reduction takes place at the anode
d) reduction takes place at the cathode
Answer : C


Question : In the electrolytic cell, flow of electrons if from
a) Cathode to anode in solution
b) Cathode to anode through external supply
c) Cathode to anode through internal supply
d) Anode to cathode through internal supply

Answer : C


Question : metal having negative reduction potential when dippedin the solution of its own ions, has a tendency :
a) to pass into the solution
b) to be deposited from the solution
c) to become electrically positive
d) to remain neutra
Answer : A


Question : A hydrogen electrode is immersed in a solution with pH = 0 (HCl). By how much will the potential (reduction) change if an equivalent amount of NaOH is added to the solution. (Take H2 p = 1 atm), T = 298 K.
a) increase by 0.41 V  b) increase by 59 mV
c) decrease by 0.41 V d) decrease by 59 mV
Answer : A


Question : During the electrolysis of fused NaCl, the reaction thatoccurs at the anode is :
a) Chloride ions are oxidized
b) Chloride ions are reduced
c) Sodium ions are oxidized
d) Sodium ions are reduced
Answer : A


Question : In electroplating the article to be electroplated is made :
a) cathode
b) anode
c) either cathode or anode
d) simply suspended in the electrolytic bath.
Answer : A


Question : The electric charge for electrode deposition of one gram equivalent of a substance is
a) One ampere per second
b) 96.500 coulombs per second
c) One on one mole of electrons
d) Charge on one mole of electrons
Answer : D


Question : When a lead storage battery is discharged
a) SO2
b) Lead is formed
c) Lead sulphate is consumed
d) Sulphuric acid is consumed
Answer : D

More Study Material

CBSE Class 12 Chemistry Chapter 3 Electrochemistry MCQs

We hope students liked the above MCQs for Chapter 3 Electrochemistry designed as per the latest syllabus for Class 12 Chemistry released by CBSE. Students of Class 12 should download the Multiple Choice Questions and Answers in Pdf format and practice the questions and solutions given in above Class 12 Chemistry MCQs Questions on daily basis. All latest MCQs with answers have been developed for Chemistry by referring to the most important and regularly asked topics which the students should learn and practice to get better score in school tests and examinations. Studiestoday is the best portal for Class 12 students to get all latest study material free of cost.

MCQs for Chemistry CBSE Class 12 Chapter 3 Electrochemistry

Expert teachers of studiestoday have referred to NCERT book for Class 12 Chemistry to develop the Chemistry Class 12 MCQs. If you download MCQs with answers for the above chapter daily, you will get higher and better marks in Class 12 test and exams in the current year as you will be able to have stronger understanding of all concepts. Daily Multiple Choice Questions practice of Chemistry and its study material will help students to have stronger understanding of all concepts and also make them expert on all critical topics. You can easily download and save all MCQs for Class 12 Chemistry also from www.studiestoday.com without paying anything in Pdf format. After solving the questions given in the MCQs which have been developed as per latest course books also refer to the NCERT solutions for Class 12 Chemistry designed by our teachers

Chapter 3 Electrochemistry MCQs Chemistry CBSE Class 12

All MCQs given above for Class 12 Chemistry have been made as per the latest syllabus and books issued for the current academic year. The students of Class 12 can refer to the answers which have been also provided by our teachers for all MCQs of Chemistry so that you are able to solve the questions and then compare your answers with the solutions provided by us. We have also provided lot of MCQ questions for Class 12 Chemistry so that you can solve questions relating to all topics given in each chapter. All study material for Class 12 Chemistry students have been given on studiestoday.

Chapter 3 Electrochemistry CBSE Class 12 MCQs Chemistry

Regular MCQs practice helps to gain more practice in solving questions to obtain a more comprehensive understanding of Chapter 3 Electrochemistry concepts. MCQs play an important role in developing understanding of Chapter 3 Electrochemistry in CBSE Class 12. Students can download and save or print all the MCQs, printable assignments, practice sheets of the above chapter in Class 12 Chemistry in Pdf format from studiestoday. You can print or read them online on your computer or mobile or any other device. After solving these you should also refer to Class 12 Chemistry MCQ Test for the same chapter

CBSE MCQs Chemistry Class 12 Chapter 3 Electrochemistry

CBSE Class 12 Chemistry best textbooks have been used for writing the problems given in the above MCQs. If you have tests coming up then you should revise all concepts relating to Chapter 3 Electrochemistry and then take out print of the above MCQs and attempt all problems. We have also provided a lot of other MCQs for Class 12 Chemistry which you can use to further make yourself better in Chemistry

Where can I download latest CBSE MCQs for Class 12 Chemistry Chapter 3 Electrochemistry

You can download the CBSE MCQs for Class 12 Chemistry Chapter 3 Electrochemistry for latest session from StudiesToday.com

Can I download the MCQs of Chapter 3 Electrochemistry Class 12 Chemistry in Pdf

Yes, you can click on the links above and download topic wise MCQs Questions PDFs for Chapter 3 Electrochemistry Class 12 for Chemistry

Are the Class 12 Chemistry Chapter 3 Electrochemistry MCQs available for the latest session

Yes, the MCQs issued by CBSE for Class 12 Chemistry Chapter 3 Electrochemistry have been made available here for latest academic session

How can I download the Chapter 3 Electrochemistry Class 12 Chemistry MCQs

You can easily access the links above and download the Chapter 3 Electrochemistry Class 12 MCQs Chemistry for each topic

Is there any charge for the MCQs with answers for Class 12 Chemistry Chapter 3 Electrochemistry

There is no charge for the MCQs and their answers for Class 12 CBSE Chemistry Chapter 3 Electrochemistry you can download everything free

How can I improve my MCQs in Class 12 Chemistry Chapter 3 Electrochemistry

Regular revision of MCQs given on studiestoday for Class 12 subject Chemistry Chapter 3 Electrochemistry can help you to score better marks in exams

What are MCQs for Class 12 Chemistry Chapter 3 Electrochemistry

Multiple Choice Questions (MCQs) for Chapter 3 Electrochemistry Class 12 Chemistry are objective-based questions which provide multiple answer options, and students are required to choose the correct answer from the given choices.